Hoist Rings


Hoist Rings
  • Thread sizes from 1/4″ – 2-1/2 inch
  • Capacities from 550 Lbs to 50,000 Lbs
  • Center pull
  • Side pull
  • UNC and Metric sizes available
  • Authorized repair and recertification
  • Authorized Distributor for:

Capacity Charts

HR-125

HR-125 UNC Threads

Hoist RingsHoist Rings

Frame Size No. HR-125 Stock No. Working Load Limit (lb)* Torque in (ft?lbf) Dimensions (in) Weight Each (lb)
Bolt Size Effective Thread Projection Length C D Radius Diameter G H
A ‡ B E F
1 † 1016887 800 7 5/16-18 x 1.50 .58 2.72 .97 .46 .34 1.87 1.12 .37
1 † 1016898 1000 12 3/8-16 x 1.50 .58 2.72 .97 .46 .34 1.87 1.05 .39
2 1016909 2500 28 1/2-13 x 2.00 .70 4.85 1.96 .87 .75 3.35 2.29 2.33
2 † 1016912 2500 28 1/2-13 x 2.50 1.20 4.85 1.96 .87 .75 3.35 2.29 2.36
2 1016920 4000 60 5/8-11 x 2.00 .70 4.85 1.96 .87 .75 3.35 2.16 2.41
2 † 1016924 4000 60 5/8-11 x 2.75 1.45 4.85 1.96 .87 .75 3.35 2.16 2.47
2 1016931 5000 100 3/4-10 x 2.25 .95 4.85 1.96 .87 .75 3.35 2.04 2.52
2 † 1016935 5000 100 3/4-10 x 2.75 1.45 4.85 1.96 .87 .75 3.35 2.04 2.59
3 1016942 7000 ** 100 3/4-10 x 2.75 .89 6.57 2.96 1.36 .94 4.87 2.97 6.72
3 † 1016946 7000 ** 100 3/4-10 x 3.50 1.64 6.57 2.96 1.36 .94 4.87 2.97 6.81
3 1016953 8000 160 7/8-9 x 2.75 .89 6.57 2.96 1.36 .94 4.87 2.84 6.84
3 † 1016957 8000 160 7/8-9 x 3.50 1.64 6.57 2.96 1.36 .94 4.87 2.84 6.96
3 1016964 10000 230 1-8 x 3.00 1.14 6.57 2.96 1.36 .94 4.87 2.72 7.09
3 † 1016969 10000 230 1-8 x 4.00 2.14 6.57 2.96 1.36 .94 4.87 2.72 7.31
4 1016975 15000 470 1-1/4-7 x 4.50 2.21 8.72 3.71 1.75 1.19 6.18 3.93 14.51
5 1016986 24000 800 1-1/2-6 x 6.75 3.00 12.55 4.71 2.39 1.75 8.48 5.52 37.73
5 1016997 30000 1100 2-4-1/2 x 6.75 3.00 12.55 4.71 2.39 1.75 8.48 5.02 40.69
6 1017001 50000 2100 2-1/2-4 x 8.0 4.00 16.88 5.75 3.00 2.25 11.00 8.03 88.00
7 1017005 75000 4300 3-4 x 10.5 5.00 19.50 6.45 3.75 2.75 14.16 8.50 166.00
8 1017009 100000 5100 3-1/2-4 x 13.0 # 7.00 22.09 7.75 4.00 3.25 15.91 9.28 265.00

*Ultimate Load is 5 times the Working Load Limit.
** Ultimate Load is 4.5 times the Working Load Limit for 7000# Hoist Ring when tested in 90 degree orientation.
† Long Bolts are designed to be used with soft metal (i.e., aluminum) workpiece. While the long bolts may also be used with ferrous metal (i.e.,steel & iron) workpiece, short bolts are designed for ferrous workpieces only.
‡ Bolt specification is an Alloy socket head cap screw to ASTM A 574.
# Hex head bolt used on Frame 8 (100,000lb.) Hoist Ring.

HR-125M

HR-125M Metric Threads

hr m, Hoist Rings

Frame Size No. HR-125M Stock No. Working Load Limit (kg) Torque in (Nm)* Dimensions (mm) Weight Each (kg)
At a 5:1 Design Factor † At a 4:1 Design Factor † (A) Bolt Size ‡ (B)Effective Thread Projection Length C D Radius E Diameter F G H
1 1016602 400 500 10 M8X1.25X40 16.9 69.9 24.6 11.8 8.5 47.5 29.9 .17
1 1016613 450 550 16 M10X1.50X40 16.9 69.9 24.6 11.8 8.5 47.5 28.1 .18
2 1016624 1050 1300 38 M12X1.75X50 16.9 123 49.8 22.3 17.5 85.1 60.4 1.05
2 1016635 1900 2400 81 M16X2.00X60 26.9 123 49.8 22.3 17.5 85.1 56.3 1.11
2 1016644 2150 2700 136 M20X2.50X65 31.9 123 49.8 22.3 17.5 85.1 52.3 1.17
3 1016657 3000 3750 136 M20X2.50X75 27.8 167 75.2 34.7 25.4 124 76.6 3.09
3 1016668 4200 5250 312 M24X3.00X80 32.8 167 75.2 34.7 25.4 124 70.5 3.21
4 1016679 7000 8750 637 M30X3.50X120 61.7 222 94.2 44.5 30.5 157 102 6.53
5 1016690 11000 13750 1005 M36X4.00X150 54.0 318 120 60.7 44.5 215 142 16.8
5 1016701 12500 15600 1005 M42X4.50X160 64.0 318 120 60.7 44.5 215 136 17.4
5 1016712 13500 16900 1350 M48X5.00X160 74.0 318 120 60.7 44.5 215 130 18.0


*The tightening torque values shown are based upon threads being clean, dry and free of lubrication.
† Individually proof loaded to 2-1/2 times the Working Load Limit based on the 4:1 design factor.
‡ Bolt specification is a Grade 12.9 Alloy socket head cap screw to Din 912. All threads are metric (ASME/ANSI B18.3.1m)

HR-1000

HR-1000 UNC Threads

Hoist Rings

Frame Size No. HR-1000 Stock No. Working Load Limit (lb)* Torque in (ft?lbf) Dimensions (in) Weight Each (lb)
Bolt Size A ‡ Eff. Thread Projection Length B C D Radius E F G H
1 1068002 800 7 5/16 – 18 x 1.50 .52 3.69 .97 .62 .44 2.27 1.38 .60
1 1068006 1000 12 3/8 – 16 x 1.50 .52 3.69 .97 .62 .44 2.27 1.38 .62
2 1068010 2500 28 1/2 – 13 x 2.25 .69 6.26 1.96 1.25 .75 4.20 2.50 3.05
2 † 1068014 2500 28 1/2 – 13 x 2.75 1.19 6.26 1.96 1.25 .75 4.20 2.50 3.07
2 1068018 4000 60 5/8 – 11 x 2.25 .69 6.26 1.96 1.25 .75 4.20 2.50 3.11
2 † 1068022 4000 60 5/8 – 11 x 3.00 1.44 6.26 1.96 1.25 .75 4.20 2.50 3.18
2 1068026 5000 100 3/4 – 10 x 2.50 .94 6.26 1.96 1.25 .75 4.20 2.50 3.24
2 † 1068030 5000 100 3/4 – 10 x 3.00 1.44 6.26 1.96 1.25 .75 4.20 2.50 3.30
3 1068034 7000 ** 100 3/4 – 10 x 3.00 .85 8.66 2.96 1.63 1.00 6.25 3.25 10.09
3 † 1068038 7000 ** 100 3/4 – 10 x 3.50 1.35 8.66 2.96 1.63 1.00 6.25 3.25 10.21
3 1068042 8000 160 7/8 – 9 x 3.00 .85 8.66 2.96 1.63 1.00 6.24 3.25 10.21
3 † 1068046 8000 160 7/8 – 9 x 3.50 1.35 8.66 2.96 1.63 1.00 6.24 3.25 10.40
3 1068050 10000 230 1 – 8 x 3.50 1.35 8.66 2.96 1.63 1.00 6.24 3.25 10.50
3 † 1068054 10000 230 1 – 8 x 4.50 2.35 8.66 2.96 1.63 1.00 6.24 3.25 10.72
4 1068058 15000 470 1-1/4 – 7 x 5.00 2.09 11.21 3.71 2.00 1.25 7.82 4.00 21.90
4 1068062 24000 800 1-1/2 – 6 x 5.50 2.59 11.21 3.71 2.00 1.44 7.82 4.00 23.00

*Ultimate Load is 5 times the Working Load Limit. ** Ultimate Load is 4.5 times the Working Load Limit for 7000# Hoist Ring when tested in 90 degree orientation. *** Individually proof loaded to 2-1/2 times the Working Load Limit based on the 4:1 design factor. † Long Bolts are designed to be used with soft metal (i.e., aluminum) workpiece. While the long bolts may also be used with ferrous metal (i.e.,steel & iron) workpiece, short bolts are designed for ferrous workpieces only. ‡ Bolt specification is an Alloy socket head cap screw to ASTM A 574. ‡‡ Bolt specification is a Grade 12.9 Alloy socket head cap screw to DIN 912. NOTE: The tightening torque values shown are based upon threads being clean, dry and free of lubrication.

SS-125

SS-125UNC Threads

ss

Frame Size No. SS-125UNC Stock No. Working Load Limit (lb)* Torque (ft-lbs) Dimensions (in) Weight Each (lb)
Bolt Size A ‡ Effective Thread Projection Length B C D Radius E Diameter F G H
1 1065000 400 3.5 5/16 – 18 x 1.0 .29 2.67 .85 .43 .34 1.84 1.27 .30
1 1065004 400 3.5 5/16 – 18 x 1.25 .54 2.67 .85 .43 .34 1.84 1.27 .30
1 1065008 500 6 3/8 – 16 x 1.25 .54 2.67 .85 .43 .34 1.84 1.27 .30
2 1065016 1250 14 1/2 – 13 x 2.0 .78 4.78 1.45 .88 .69 3.52 2.31 2.6
2 1065020 1250 14 1/2 – 13 x 2.25 1.03 4.78 1.45 .88 .69 3.52 2.31 2.6
2 1065024 1250 14 1/2 – 13 x 2.5 1.28 4.78 1.45 .88 .69 3.52 2.31 2.6
2 1065028 2000 30 5/8 – 11 x 2.0 .78 4.78 1.45 .88 .69 3.52 2.18 2.6
2 1065032 2000 30 5/8 – 11 x 2.25 1.03 4.78 1.45 .88 .69 3.52 2.18 2.6
2 1065036 2000 30 5/8 – 11 x 2.5 1.28 4.78 1.45 .88 .69 3.52 2.18 2.6
2 1065040 2500 50 3/4 – 10 x 2.25 1.03 4.78 1.45 .88 .69 3.52 2.06 3.0
2 1065044 2500 50 3/4 – 10 x 2.75 1.53 4.78 1.45 .88 .69 3.52 2.06 3.0
3 1065048 3500 50 3/4 – 10 x 2.75 1.04 6.52 2.20 1.40 .94 5.14 3.06 7.0
3 1065052 3500 50 3/4 – 10 x 3.25 1.54 6.52 2.20 1.40 .94 5.14 3.06 7.0
3 1065056 4000 80 7/8 – 9 x 2.75 1.04 6.52 2.20 1.40 .94 5.14 2.93 7.0
3 1065060 4000 80 7/8 – 9 x 3.0 1.29 6.52 2.20 1.40 .94 5.14 2.93 7.0
3 1065064 5000 115 1 – 8 x 3.0 1.29 6.52 2.20 1.40 .94 5.14 2.81 7.5
3 1065068 5000 115 1 – 8 x 3.25 1.54 6.52 2.20 1.40 .94 5.14 2.81 7.5
3 1065072 5000 115 1 – 8 x 4.0 2.29 6.52 2.20 1.40 .94 5.14 2.81 7.5
4 1065080 7500 235 1 – 1/4 – 7 x 4.0 1.89 8.73 3.19 1.75 1.25 6.50 4.12 14.0
5 1065084 12000 400 1 – 1/2 – 6 x 5.5 2.70 12.47 4.87 2.25 1.75 8.55 6.41 34.0
5 1065088 15000 550 2 – 4.5 x 5.75 2.96 12.47 4.87 2.25 1.75 8.55 5.91 36.0
6 1065092 25000 1050 2 – 1/2 – 4 x 8.0 4.00 16.87 6.52 3.00 2.25 11.67 8.03 88.0
6 1065096 25000 1050 2 – 1/2 – 8 x 8.0 4.00 16.87 6.52 3.00 2.25 11.67 8.03 88.0
7 1065100 37500 2150 3 – 4 x 10.25 5.00 19.50 8.10 3.75 2.75 14.15 8.48 166.0
8 1065104 50000 2550 3 – 1/2 – 4 x 13 7.00 22.09 8.60 4.00 3.25 15.90 9.28 265.0

*Ultimate Load is 5 times the Working Load Limit.
‡ Bolt specification is 316 Stainless Steel socket head cap screw to ASTM F 837 Group 1 (316).

HR-500

HR-500 Trench Cover Hoist Rings Coil Threads

hr

HR-500 Stock No. Working Load Limit (lb)* Weight Each (lb) Dimensions (in)
Coil Thread Size A Effective Thread Projection Length B C D Radius E F G H J
1017907 5000 5.6 1″ – 3.5 1.00 5.90 5.50 1.25 .75 4.20 2.50 .77
1017916 10000 15.7 1-1/4″ – 3.5 1.00 8.27 7.00 1.63 1.00 6.25 3.25 .81
1017925 15000 29.8 1-1/2″ – 3.5 1.50 10.63 9.13 2.00 1.25 7.82 4.00 .80

*Ultimate Load is 5 times the Working Load Limit.

HRN-500 Trench Cover Nuts

HRN-500 Stock No. Working Load Limit (lb) Weight Each (lb) Coil Thread Size Dimensions (in)
Nut Diam.
K
TrenchCover Hole Diam.
L
Nut Thickness
M
1063405 5000 1.2 1″ – 3.5 3.00 3.12 .75
1063414 5000 1.4 1″ – 3.5 3.00 3.12 .88
1063423 5000 1.6 1″ – 3.5 3.00 3.12 1.00
1063432 10000 1.1 1-1/4″- 3.5 3.00 3.12 .75
1063441 10000 1.3 1-1/4″- 3.5 3.00 3.12 .88
1063450 10000 1.5 1-1/4″- 3.5 3.00 3.12 1.00
1063454 10000 1.9 1-1/4″- 3.5 3.00 3.12 1.25
1063458 10000 2.3 1-1/4″- 3.5 3.00 3.12 1.50
1063469 15000 2.0 1-1/2″- 3.5 3.50 3.62 1.00
1063478 15000 2.6 1-1/2″- 3.5 3.50 3.62 1.25
1063487 15000 3.1 1-1/2″- 3.5 3.50 3.62 1.50

 

HR-500HG Hole Gauge

Aids in determining when studs and plate nuts need replacing.

Coil Thread Size (in) HR-500HG Stock No. Weight Each (lb)
1.00 – 3.5 1064666 .6
1.25 – 3.5 1064675 .8
1.50 – 3.5 1064684 1.0

HR-500TC Thread Clean-Up Tool

Cleans dirt and other material as from nut threads.

Coil Thread Size (in) HR-500TC Stock No. Weight Each (lb)
1.00 – 3.5 1064639 1.2
1.25 – 3.5 1064648 1.7
1.50 – 3.5 1064657 1.9

HR-500WF Weld Fixture

Holds nut securely in place to ease in initial tack welding.

Coil Thread Size (in) HR-500WF Stock No. Weight Each (lb)
1.00 – 3.5 1064602 1.8
1.25 – 3.5 1064611 2.1
1.50 – 3.5 1064620 2.5

HR-100

HR-100 Pivot Hoist Rings Coil Threads

hr

Frame Size No. HR-100 Stock No. Working Load Limit (lb)* Torque in (ft?lbf) No. of Bolts Weight Each (lb) Dimensions (in)
Bolt Size A Effective Thread Projection Length B C Diameter D Radius E F G H J K
1 1067408 2000 7 2 .6 5/16-18 x 1.25 .82 3.43 2.00 .62 .44 2.27 1.38 1.00
2 1067417 2500 12 2 3.1 3/8-16 x 1.25 .65 6.03 2.25 1.25 .75 4.20 2.50 1.13
2 1067426 5000 28 2 3.3 1/2-13 x 2.00 1.40 6.03 2.63 1.25 .75 4.20 2.50 1.50
3 1067435 12000 28 4 10.5 1/2-13 x 2.75 1.65 8.27 3.13 1.63 1.00 6.25 3.25 1.63 1.25
4 1067444 20000 60 4 22.0 5/8-11 x 3.25 1.65 10.63 4.47 2.00 1.25 7.82 4.00 2.06 1.25

*Ultimate Load is 5 times the Working Load Limit.

Ask an Expert